Selecting The Scene Mode; Normal Mode - Epson PhotoPC L-500V User Manual

Selecting the Scene Mode

Five scene modes are pre-programmed in the camera. When using a scene mode, the camera is
automatically configured to the best image capture settings for the situation.
Note:
❏ When any scene mode is set, selecting macro mode shifts the camera settings to normal mode. If you
cancel the macro mode, the camera settings remain in normal mode.
❏ Using scene modes together with Exif 2.2 software and PRINT Image Matching II will provide the best
possible printing results.
❏ The Self timer, Resolution, Quality, Exp Comp, Continuous Shooting, Digital Zoom, Frames, etc. are
not affected by the scene mode.
1. Turn the Mode dial to
2. Press the MENU button. The Photography menu is displayed.
3. Select Scene Mode by moving the joystick u or d, then move the joystick r.
4. Select the desired scene mode by moving the joystick u or d, then press the OK button.

Normal mode

This mode is best for most shooting. By default, the flash works automatically based on the
available light on the subject. The shutter speed is also selected to minimize camera shake.
38
Taking Photos
or .