Epson PhotoPC L-500V User Manual page 74

The camera takes too long to take a photo
Cause
Did you press the shutter
button completely with one
push?
The flash does not work
Cause
Is the flash setting correct?
The LCD monitor is hard to see
Cause
Is the LCD monitor
brightness level set to too
bright?
74
Maintenance and Troubleshooting
What to do
Usually you should press the shutter button halfway and hold it
to set the focus, then press the rest of the way to take a photo.
When pressing the shutter button fully all at once, it takes time
to focus and set the exposure before the shutter releases. It may
take longer than when pressing the shutter button in two steps.
What to do
When flash off is set as the flash setting, the flash will not go
off. See "Controlling the Flash" on page 34 for details.
What to do
Adjust the LCD Brightness setting in the Setup Menu. See
"Making Additional Settings" on page 44 for details.