Turning On The Hypict Mode; Setting The Flash - Epson PhotoPC 750Z User Manual

Turning on the HyPict mode

1. Turn the dial switch on the camera to View.
2. Press the SEL button. Three menu icons appear at
the top of the LCD monitor.
3. Highlight the conditions icon
button, then press the SEL button. The Conditions
menu appears.
4. Highlight the HyPict icon
button, then press the SEL button. HyPict is
set to On.
To exit the Conditions menu, press the ESC button two
times.
2-4
Taking Pictures

Setting the flash

using the
using the or
The built-in flash is effective within a range of
80 to 270 cm. The range varies depending on
the Sensitivity setting (see page A-2 for
details). Turn on the camera and press the
button on the camera to cycle through
flash
the three flash settings. The settings appear on
the display panel as shown below.
Automatic (default setting)
Forced flash
Flash off
Automatic
The flash fires automatically whenever
more lighting is needed.
Forced flash
The flash fires with every picture you
take. Use this setting to compensate for
backlighting; for example, when you are
facing the sun.