User manual (epson stylusrip professional software) (62 pages)
Summary of Contents for Epson PhotoPC 750Z
Page 2
EPSON is a registered trademark of SEIKO EPSON Corporation. PhotoPC is a registered trademark, and HyPict, Image Authentication System, and FaxAdvice are trademarks of EPSON America, Inc. SoundAdvice is a service mark of EPSON America Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.
® taken with your EPSON PhotoPC 700 or EPSON PhotoPC 750Z camera. IAS detects when even a single bit of digital data in a picture has been altered. Because IAS doesn’t change the file format, it has no affect on your ability to store and display pictures, or to use them in other applications.
System Requirements Your system must have the following: ® compatible PC with a 486 or higher processor ® ® Microsoft Windows 98, Windows 95, ® Windows NT 3.51, or Windows NT 4.0 (with Service Pack 3) or greater 9-pin serial port At least 16MB RAM VGA monitor with minimum resolution of 640 480 and at least 16-color display...
Installing IAS Follow these steps to install IAS: 1. Insert the EPSON Image Authentication System CD into your CD-ROM drive. 2. Click the Start button, then click Run . 3. Type D: \SETUP (where D is the letter of the CD-ROM drive) and click OK to start the installation program.
Page 7
Turn off the camera and LCD screen, then follow these steps: 1. Locate you computer’s serial port. Note: You may have two serial ports labeled COM1 and COM2, or the ports may be labeled with icons. If you have two ports, use COM1 to connect your camera.
Page 8
3. Open the connector cover on the side of the camera. serial port 4. Line up the cable’s connector with the camera’s serial port. Then insert the connector. 5. Turn on the camera. Note: If you have problems connecting to the COM port you’ve selected, check your computer’s COM port configuration and try again.
Page 9
6. Click Start , point to Programs , EPSON , and click Image Authentication System . You see the following Camera Uploader screen:...
Page 10
7. Click the UPLOAD button. The software uploads to your camera. When uploading is complete, you see the following screen: Your software license permits you to upload the software to one camera. If you purchased additional copies of software, continue with step 8.
Page 11
8. To upload IAS to another camera, disconnect the first camera and connect the second. Turn the second camera on, then click Test Connection to make sure the camera is properly connected. The software uploads automatically to the second camera. 9.
(Transfer your photos to the computer before starting this procedure.) To verify a picture: 1. Click Start , point to Programs , EPSON , and click Image Authentication System . You see the...
Page 13
2. From the File menu, select Open , or click button. You see the Open Folder Open dialog box. Note: The command Select Key List File on the File menu is not operational for this release. 3. Locate and select the image files that you want to verify.
Page 14
The File List View lists the selected files and the following details for each picture: Verification Results Shows the verification results. indicates the picture has not been PASS altered. FAIL means the picture has been altered. indicates the picture Non-IAS image was taken with a camera without IAS loaded.
Notes Gives more detailed explanations of errors. Path Shows the path of the image file. Displaying Different Views In addition to the File List View, you can display verification results for a single image file (Test Info View), or you can display the File List View and Test Info View at the same time.
Page 16
To display the Test Info View, click the Test button in the toolbar, or choose Test Info View from the View menu. You see the Info View following screen: In addition to verification results, the Test Info View displays a thumbnail image of the selected picture.
Page 17
To see the File List View and Test Info View at the same time, click the Both Views button, or choose Both Views from the View menu. You see the following screen: To return to the File List View, click the File button on the toolbar, or choose File List View from the View menu.
EPSON provides technical assistance through electronic support services and automated telephone systems 24 hours a day, seven days a week, as follows: From the Internet, you can reach EPSON’s Home Page at http://www.epson.com. For pre-recorded answers to commonly asked questions, call EPSON SoundAdvice at (800) 922-8911.
Page 19
You can purchase manuals and accessories from EPSON Accessories at (800) 873-7766 (U.S. sales only). In Canada, please call (800) 807- 7766 for dealer referral. Or visit our website at www.epsonsupplies.com (U.S. sales only).
Appendix When you’ve uploaded IAS to your camera, it takes slightly longer to process pictures. This appendix contains information about camera frame rates (approximate time between pictures) when IAS is installed. Frame rates for the following tables are listed in seconds.
Page 21
Color Mode, LCD On Image Quality Photo PC 700 Photo PC 750Z Standard Fine Super Fine HyPict...