Connecting The Camera To A Video Device; Setting The Broadcast Signal System - Epson PhotoPC 3100Z User Manual

Connecting the Camera to a Video
Device
You can display your photos, video clips, uploaded images,
and sounds on a multimedia projector, television, VCR, or
other video output device.
NOTE
The optional AC adapter is highly recommended while the
camera is connected to a video device. See page B-2 for
instructions and ordering information.
You need the video cable that came with your PhotoPC
3100Z to connect to your video device.

Setting the Broadcast Signal System

If you will use your camera with a television, make sure the
camera has the correct broadcast signal setting.
1
Turn the camera dial to
menu.
2
Press the button under
the icon to go to the
Language/Signal setup
menu.
3
If necessary, press the button
next to to change the
TV
setting to (the U.S.
NTSC
broadcasting standard).
4
Press the button under
BACK
return to the SETUP menu.
to display the SETUP
to save the setting and
Presenting Your Photos 14-10