Connecting The Camera To A Video Device - Epson PhotoPC 3000Z Manual

EPSON PhotoPC 3000Z
4. Push the (telephoto) button to zoom in on your subject,
T
or the (wide angle) button to zoom out. You see a display
W
with green zoom steps and the current zoom position in
yellow.
5. Center your subject on the screen, then press the shutter
button halfway down to lock the auto focus and exposure.
The photo capture light stops flashing and you see a green
circle on the screen when the lens locks in focus and the
camera locks its exposure settings. While holding the
shutter button down, you can reframe your picture if you
want.
photo capture
light
microphone
6. Press the shutter button the rest of the way down to take the
picture.
7. Hold the camera still until it clicks. Then release the shutter
button.
NOTE
To prevent a brief delay between the time you press the shutter
button and when the camera clicks, make sure you press it down
firmly. If there is still a delay, hold the camera still until it clicks to
avoid blurring your images.
When the camera's green photo capture light stops flashing,
you're ready to take another picture.
EPSON PhotoPC 3000Z
12 -
Or, if the Confirmation setting is on, you see a
confirmation screen.
NOTE
You enable the confirmation screen in the Shot Setup menu.
From the confirmation screen, you can do the following:
❏ Press the button next to Delete if you don't want the
picture.
❏ Press the button next to Rec Sound to record a
message. You see a countdown on the screen. During
this time, you can record a message into the camera's
microphone.
❏ Press the button next to
images. (Press the button under
View menu.)
NOTE
If the LCD screen is idle for more than the designated power off time,
the camera turns off automatically. To turn it back on, press the
shutter button.
Connecting the Camera to a Video
Device
You can display your photos, video clips, uploaded images,
and sounds on a multimedia projector, television, VCR, or
other video output device.
NOTE
The optional AC adapter is highly recommended when connecting to
a video device.
Use the video cable that came with your EPSON PhotoPC
3000Z to connect to your video device.
Follow these steps:
1. Make sure your camera and TV (and VCR) or video
projector are turned off.
4/00
to instantly play back your
to return to the
BACK