■ Information: Display a show you have reserved
to watch. (You can also change the reservation
Alternatively, you can view Information by
highlighting a program and pressing the
■ Select All / Deselect All: Select or deselect all reserved
(analog channels only)
If the reception is clear, you do not have to ﬁne tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, ﬁne tune
the channel manually. Scroll to the left or right until the image
Settings are applied to the channel you're currently
Fine tuned channels that have been saved are marked
with an asterisk "*" on the right-hand side of the
channel number in the channel banner.
To reset the fine-tuning, select Reset.
Changing the Preset Picture Mode
Select your preferred picture type.
■ Dynamic: Suitable for a bright room.
■ Standard: Suitable for a normal
■ Movie: Suitable for watching movies in a
Adjusting Picture Settings
Cell Light / Contrast / Brightness /
Sharpness / Color / Tint (G/R)
Your television has several setting options for picture quality
When you make changes to Cell Light, Contrast,
Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.
In PC mode, you can only make changes to Cell
Light, Contrast and Brightness.
Settings can be adjusted and stored for each
external device connected to the TV.
The Eco Function can be used to enhance your power
■ Energy Saving (Off / Low / Medium / High / Picture
Off): This adjusts the brightness of the TV in order to
reduce power consumption. If you select Picture Off,
the screen is turned off, but the sound remains on.
Press any button except the volume button to turn on
the screen. Until the screen turns on again, a distorted
picture will be displayed for about 4 seconds.
■ Eco Sensor (Off / On): To enhance your power savings;
the picture settings will automatically adapt to the light
in the room.
Min Cell Light: When Eco sensor is On, the minimum
screen brightness can be adjusted manually.
■ No Signal Power Off (Off / 15 min. / 30 min. / 60
min.): To avoid unnecessary energy consumption,
set how long you want the TV to remain on if it's not
receiving a signal.
If you adjust the Cell Light, the Eco Sensor will
be set to Off.
If Eco Sensor is On, the display brightness
may change (become slightly darker or brighter)
depending on the surrounding light intensity.
Disabled when the PC is in power saving mode.