Samsung PN50C680G5FXZA User Manual page 19

■ 3D Mode: Select the 3D input format.
✎
If you want to feel the 3D effect fully, please wear
the 3D Active Glasses first, and then select 3D
Mode from the list below that provides the best
3d viewing experience.
✎
When watching 3D images, turn on 3D Active
Glasses.
3D Mode Operation
Off Turns the 3D function off.
Changes a 2D image to 3D.
2D 3D
Displays two images next to
Side by Side
each other.
Displays one image above
Top & Bottom
another.
Displays the images for the left
Line by Line
and right eye alternately in rows.
Displays the images for the
Vertical Stripe left and right eye alternately in
columns.
Displays the images for the
Checker
left and right eye alternately in
Board
pixels.
Displays the images for the
Frame
left and right eye alternately in
Sequential
frames.
✎
"Side by Side" and "Top & Bottom" are available
when the resolution is 720p, 1080i and 1080p in
DTV, HDMI and USB mode or when set to PC
and the PC is connected through an HDMI/DVI
cable.
✎
"Vertical Strip", "Line by Line" and "Checker
Board" are available when the resolution is set to
PC and the PC is connected through an HDMI/
DVI cable.
✎
"Frame Sequential" displays the frequency (60Hz
only) when the resolution is set to PC.
■ 3D
2D (Off / On): Displays the image for the left eye
only.
✎
This function is deactivated when 3D Mode set to
"2D 3D" or Off.
■ 3D View Point: The overall adjustment of 3D
perspective.
✎
This function is deactivated when 3D Mode set to
"2D 3D" or Off.
■ Depth: Adjusts focus / depth in "2D
✎
This function is only activated when the 3D Mode
is "2D 3D".
■ Picture Correction: Adjusts the images for the left and
right eye.
■ 3D Auto View (Off / On): If 3D Auto View is set to On,
a "Side by Side" format HDMI signal with one of the
resolutions below is automatically switched to 3D. Here,
correct 3D information must be sent from the Standard
HDMI 3D Format.
✎
If a 3D failure occurs due to a 3D information error,
set 3D Auto View to Off and manually select a
3D Mode using the
menu.
✎
Support resolution (16:9 only)
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x
1080 input.
An input resolution other than 1920 x 1080 may not be
displayed properly in 3D display or full screen mode.
How to watch the 3D image
Using the LEFT / RIGHT keys on the remote control, Using the LEFT / RIGHT keys on the remote control,
select the icon suitable for the picture on screen. select the icon suitable for the picture on screen.
1. Press the
menu will appear.
2. Press the
To watch in 3D, wear 3D Active Glasses and press the
power button on the glasses.
3D" mode.
3. Select OK, then press the ENTERE button.
4. Using the
the 3D Mode of the image you want to view.
✎
Some 3D modes may not be available depending
on the format of the image source.
3D button or corresponding
Resolution Frequency (Hz)
1280 x 720p
1920 x 1080i
1920 x 1080p 24 / 30 / 60 Hz
3D
To watch in 3D, wear 3D glasses and press
the power button on the glasses.
Viewing 3D TV motion pictures for long
periods may cause eye fatigue and/or
dizziness.
OK Cancel
L Move E Enter e Exit
3D 3D
L Move E Enter e Exit L Move E Enter e Exit
CONTENT button, then the Content View
or button, then select 3D.
or buttons on your remote control, select
60 Hz
60 Hz
19
English