Network Setup (Manual)
If the other methods do not work, you need to enter the
Network setting values manually.
Getting the Network Connection Values
To get the Network connection values on most Windows
computers, follow these steps:
1. Right click the Network icon on the bottom right of the
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the Support tab.
4. On the Support tab, click the Details button. The
Network settings are displayed.
How to set up manually
To enter the Network connection values manually, follow
1. Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 31).
2. Press the
button to select Internet Protocol Setup,
and then press the ENTERE button. Press the
button to select Manual, and then press the
3. Press the
button to go to the ﬁrst entry ﬁeld (IP
4. Use the number buttons to enter numbers.
5. When done with each ﬁeld, use the
successively to the next ﬁeld. You can also use the other
arrow buttons to move up, down, and back.
6. Enter the IP Address, Subnet Mask, and Gateway
7. Press the
button to go to DNS.
8. Press the
button to go to the ﬁrst DNS entry ﬁeld.
Enter the numbers as above.
9. When done, press the
button to go to Select a
Network. Select your network, and then press the
10. Go to Step 4 in the "How to set up automatically" (p.
32), and follow the directions from that point on.
If Your TV Fails to Connect to the Internet
Your TV may not be able to connect to the Internet
because your ISP has permanently registered the
MAC address (a unique identifying number) of your
PC or modem, which it then authenticates each time
you connect to the Internet as a way of preventing
unauthorized access. As your TV has a different MAC
address, your ISP can not authenticate its MAC address,
and your TV can not connect.
To resolve this problem, ask your ISP about the
procedures required to connect devices other than a PC
(such as your TV) to the Internet.
If your Internet service provider requires an ID or
password to connect to the Internet, your TV may not
be able to connect to the Internet. If this is the case, you
must enter your ID or password when connecting to the
The internet connection may fail because of a ﬁrewall
problem. If this is the case, contact your Internet service
If you cannot connect to the Internet even after you
have followed the procedures of your Internet service
provider, please contact Samsung Electronics at
button to move