Download  Print this page

Samsung PN50C680G5FXZA User Manual Page 32

6+ series; 680 series.
Hide thumbs

Advertisement

Advanced Features
How to set up automatically
To set up the wireless connection automatically, follow these
steps:
1. Follow Steps 1 through 6 in the "How to set up using
PBC (WPS)" (p. 31).
2. Press the
button to select Internet Protocol Setup,
and then press the ENTERE button. Press the
button to select Auto, and then press the ENTERE
button.
3. Press the
button to go to Select a Network, and
then press the ENTERE button. The Network function
searches for available wireless networks. When done, it
displays a list of the available networks.
4. In the list of networks, press the
a network, and then press the ENTERE button.
If the AP is set to Hidden (Invisible), you have
to select Add Network and enter the correct
Network Name (SSID) and Security Key to
establish the connection.
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6. Press the
or
button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
Wireless Network Setup
Security Key
A
B
C
D
E
F
H
I
J
K
L
M
O
P
Q
R
S
T
V
W
X
Y
Z
n Move E Enter R Return
7. On the Security screen, enter your network's Pass
Phrase.
You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
32
English
8. To enter the Pass Phrase, follow these general
or
9. When done, press the Blue button on your remote. The
or
button to select
10. Wait until the connection confirmation message is
11. To test the connection, press the
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the "Samsung Wireless LAN Adapter" by using a
peer to peer network.
How to connect to new Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
0 entered
Number
0~9
G
2. Choose Select a Network. A list of devices/networks
N
Lower case
U
Delete
B
3. While in the device list, press the Blue button on the
Space
4. Input the generated Network Name (SSID) and
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
2. Choose Select a Network. The Device/Network list
3. Select the device you want in the Device list.
4. If security key is required, input the security key.
directions:
– Press the number buttons on your remote to enter
numbers.
– Use the direction buttons on your remote to move
from button to button on the Security Key screen.
– Press the Red button to change case or display
symbols/characters.
– To a enter letter or symbol, move to the letter or
symbol, and then press the ENTERE button.
– To delete the last letter or number you entered, press
the Green button on your remote.
Network Connecting screen appears.
displayed, and then press the ENTERE button. The
Network Setup screen re-appears.
select Network Test, and then press the ENTERE
button.
PBC (WPS)" (p. 31).
appears.
remote.
The message Ad-hoc is a direct Wi-Fi
connection with cell phone or PC. The existing
network system may have limited functionality.
Do you want to change the network
connection? is displayed.
Security Key into the device you want to connect.
PBC (WPS)" (p. 31).
appears.
If network doesn't operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
RETURN
button to

Advertisement

Table of Contents

   Related Manuals for Samsung PN50C680G5FXZA

This manual is also suitable for:

Pn50c680Pn58c680

Comments to this Manuals

Symbols: 0
Latest comments: