Using A Memory Card; Using The Lcd - Epson P-3000 User Manual

❍
If you cannot insert the plug into the power outlet,
contact an electrician.
❍
Remove the AC plug from the outlet during lightning
storms.

Using a Memory Card

❍
Only memory cards designed for the product's
specifications can be used. (See page 16.)
❍
The methods for using memory cards vary according to
card type. See the documentation included with your
memory card for details.
❍
Do not remove a memory card or turn off the product
while the memory card access light is flashing.

Using the LCD

❍
The LCD panel on the viewer may contain a few small
bright or dark spots. These are normal and do not mean
that your LCD panel is damaged in any way.
❍
If the LCD panel on the viewer is damaged, contact
Epson.
❍
If the liquid crystal solution contained in the LCD panel
on the viewer leaks out and gets onto your hands, wash
them thoroughly with soap and water. If it gets into
your eyes, flush them immediately with water. If
discomfort or vision problems remain after a thorough
flushing, see a doctor immediately.
❍
Use only a soft, dry cloth to clean the display. Do not
use liquid or chemical cleaners.
Storing, Maintaining, or Transporting the
Viewer
❍
Do not store the viewer outdoors.
❍
Do not store the viewer near water.
❍
Do not store the viewer in a location subject to high
temperature or humidity.
❍
Do not store the viewer in a location subject to rapid
changes in temperature or humidity.
❍
Do not store the viewer in a location subject to direct
sunlight or strong light sources.
❍
Unplug the viewer from the power outlet before
cleaning it. Use a damp cloth for cleaning and do not
use liquid or aerosol cleaners.
Notices and Specifications 75