Maintenance; Lubrication - Sears Craftsman 113.213850 Owner's Manual

maintenance
WARNING:, FOR YOUR OWN SAFETY, TURN
SWITCH OFF AND REMOVE PLUG FROM
POWER SOURCE OUTLET BEFORE MAINTAIN-
ING OR LUBRICATING YOUR DRILL PRESS.
Frequently blow out any dust that may accumu-
late inside the motor.
A coat of automobile-type wax applied to the
table and column will help to keep the surfaces
clean.
If the power cord _s worn or cut, or damaged in
any way, have it replaced immediately.
lubrication
All of the BALL BEARINGS are packed with
grease at the factory. They require no further
l ubricat ion.
Periodically lubricate the gear and rack table
elevation mechanism, the SPLINES (grooves} in
the spindle, and the RACK (teeth on the quill).
See "Getting to Know Your Drill Press" - p. 12
for diagram.
recommended accessories
Drill Bits ........................... See Catalog
Rotary Planer ............................ 9-2745
Hold-Down and Guide .................... 9-2457
E)rill Press Vises .................... See Catalog
Rotary Table ............................. 9-2495
Drill Press Mortising Kit ................. 9-29503
Circle Cutter 1/4-, 1/2- Shank ...... 9-3645 - 9-3640
Hole Saws up to 21/2 in. dia. max ..... See Catalog
5 Pc. Stop Collar Set ................... 9-67063
Sanding Drums ................... 9-2497 - 9-2498
Buffing Wheels up to 4 in. dia. max.. See Catalog
Polishing Wheel. 11/2" x 1 In ............. 9-64991
Power Tool Know-how Handbooks
Radial Saw ............................ 9-2917
Table Saw ............................. 9-2918
The recommended accessories listed here are
current and were available at the time this
manual was printed.
18