Epson Professional Series II User Manual page 38

When you are finished adjusting the image, press
The LCD displays Mem Select : n (where n is a number
from 15 through 22 and represents the first available
user-defined video mode). If no arrow appears after the
user-defined video mode number, there is currently no
display information for this mode stored in the monitor's
memory.
Note
If the LCD displays Mem Select : nt(where n is a
number from 15 through 22), the monitor already
contains eight user-defined video modes. The arrow
after the user-defined video mode number indicates that
display information for this mode is stored in the
monitor's memory.
If you want to store your settings over the previous
display information for this mode, go to step 7. If you
want to store your settings over another user-defined
video mode, select another mode by pressing the + or -
side of the Adjustment button.
Before you go to step 7, make sure you want to store
your settings over the previous settings for the mode
you select. After you store new display information for a
user-defined video mode, you cannot recall the previous
display information for the mode.
(If you do not want to create a user-defined video mode at
this time, press
Mode not found.)
7. To save your settings for the displayed user-defined video
mode, press
the current user-defined video mode.
30 Professional Series II Monitor
MEM SEL
again. The LCD redisplays
MEM STORE.
The LCD displays the number of
MEM SEL.