Interfacing Requirements - Epson Professional Series II User Manual

Interfacing Requirements

Input signals
Video input
Horizontal frequency
Vertical frequency
(refresh rate)
Signal connectors
Professional Series II Monitor
5 0
Video: RGB analog
Input impedance: high or 75R
(switch-selectable)
Sync: Composite sync on green,
composite horizontal and vertical
sync at TTL level, or separate
horizontal and vertical sync at
TTL level
0 to 0.714 V maximum
30 to 82 KHz; continuous range,
autoscan
50 to 160 Hz; continuous range,
autoscan
One 15-pin, D-Sub miniature,
VGA connector; five BNC connectors:
V, H/(H+V), B, G, and R (vertical,
horizontal/ combined, blue, green,
and red)