Epson Professional Series II User Manual page 21

5. Plug the VGA connector on the color-coded video cable into
the computer's VGA interface and tighten the connector
screws.
6. Connect one 75Q video interface cable to each T connector
on the first monitor, as shown below.
7. Then connect each 75Q video interface cable to the
appropriate BNC connector on the second monitor.
Connect the cable from the T connector labeled
BNC connector labeled
H/(HtV)
labeled
on. The illustration on the next page shows two monitors
connected to the computer's video interface.
T connector
V,
the cable from the T connector
to the BNC connector labeled
Professional Series II Monitor
ce cable
V
to the
H/(H+V),
and so
13