Maintenance; Maintenance Check List - Craftsman 247.886510 Owner's Manual

Be certain the traction drive clutch
leveris released b efore moving thespeed
selectlever.
4. Making certainnobystanders o r obstacles arein
frontof the unit, engagethe augerdriveclutch
lever(located on left handle).
5. Engage thetractiondriveclutchlever,located on
the right handle.As the snowthrowerstartsto
move,maintaina firm hold on the handle,and
guide the snowthroweralongthe path to be
cleared. D onotattempt t opushthesnow thrower.
Tostoptheforwardmotion, r elease thetractiondrive
clutchlever. R elease t heauger d riveclutchlever t ostop
the snowthrowingaction.
Operating Tips
I. For most efficient snow removal, remove snow im-
mediately after it falls.
2. Discharge snow downwind whenever possible.
Slightly overlap each previous swath.
3. Set the skid shoes 114" below the scraper bar for
normal usage. The skid shoes may be adjusted up-
ward for hard-packed snow. Adjust downward (rais-
ing the scraper bar) when using on gravel or
uneven surfaces.
4. Be certain to follow the precautions listed under
"To Stop Engine" on page 12 to prevent possible
freeze-up.
5. Clean the snow thrower thoroughly after each use.
MAINTENANCE
Disconnect the spark plug wire before performing any
repairs or maintenance.
Check Engine Oil • • •
SERVICE RECORD
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Change Engine Oil • • •
Tighten All Bolts and Nuts • •
Check Adjustment of Auger Clutch •
Check Spark Plug • •
Lubricate Shifting Mechanism & Chains • •
Check Fuel •
Drain Fuel •
13