Epson EMP MONITOR OPERATION V4.30 User Manual page 38

E-mail notification of problem/warning/status
Message
Other error Stop using the projector, disconnect the power
cable from the electrical outlet, and contact
Supply System Error
Epson.s Projector's User's Guide
(Ballast)
Auto Iris Error
Network error (TCP Check that the projector's power is turned on and
connection error) the LAN cable is connected, and also check that
Network Monitoring is set to ON and Standby Mode
is set to Network ON. s Projector User's Guide
Network error Check that the projector has been correctly
(ESC/VP.net connected to the network. s Projector User's
communication error) Guide
Network error Check the projector's Monitor Password.
(monitor password
authentication error)
Messages to inform that the projector has recovered from the error or
warning statuses are sent.
Remedy
38