Table of Contents
Advertisement
Monitoring window layout
The icon patterns and their meanings are explained below.
Type: Shows the group or projector status.
Display name: Shows the display name.
Power: Shows the power on status for the projector.
Power on and normal status
Power off and normal status
Lamp Hours: Shows the lamp operating time for the projector.
Source: Shows the input source that has been selected for the projector.
Computer or Computer1
Computer2
BNC
S-Video
Video(RCA)
Video(BNC)
Temperature level: The following five icons display the differing internal
temperature status of the projector.
Internal temperature
normal
Internal temperature
normal
High-temperature
warning
Power on and abnormal status
Power off and abnormal status
DVI or HDMI (Digital)
D-Video
Easy MP
USB Display
USB
LAN
High-temperature
warning
Internal temperature error
Error information: Shows the warning or problem status using the
following icons.
*
Replace Lamp
High-temperature warning
Replace Air Filter
No Air Filter
Low Air Flow
Air Flow Sensor Err.
Low air flow error
Air filter air flow sensor error
Lamp Cover Open
*
You can display Replace lamp at any time preset at Environment setup in
the Tool menu.
Detectable error information differs with the projector you are using.
Checking properties in detail
You can check the properties of groups and projectors in detail.
Displaying group properties
Procedure
You can use either of the following methods to display the proper-
ties.
• Displaying the properties for all groups in Grouping view
Right-click in Grouping view and select Property.
28
Lamp Error
Lamp failure at power on
High internal temperature error
Internal Error
Fan error
Sensor error
Supply System Error (Ballast)
Auto Iris Error
Other error
Advertisement
Table of Contents
