Troubleshooting - Craftsman 536.772330 Operator's Manual

PROBLEM
Engine difficult to start
or
Engine runs erratically
or
Engine will not run at full
speed
Engine smokes excessively
CAUSE
Stale fueJ
Dirt in fuel tank or out of fue
i i uel.
Carburetor out of adjustment
Fouled spark plug
Dirty air filter
Dirty air filter
CORRECTION
Drain fuel tank. Fill with fresh fuel.
Drain and clean fuel tank. Fill with fresh
Contact a Sears or other qualified
service dealer.
Clean and set spark plug gap.
Clean or replace air filter.
Clean or replace air filter.
Cutting blade will not rotate
Debris interferes with blade
Loose blade
Damaged V-belt
Clean debris from blade.
Tighten blade nut.
Replace V-belt,
Blade will not cut properly
Excessive vibration
Damaged quill bearings
Damage or worn blade
Loose parts
Replace the quill assembly. Contact a
Sears or other qualified service dealer.
Replace the blade.
Stop engine immediately. Tighte nal
fasteners. If vibration continues, take
the unit to a Sears or other qualified
service dealer.
Need Assistance?
Call 1-800-4-MY-HOMED (1-800-469-4663)
24