Advertisement
,_
WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities
contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some
examples
of these chemicals
are:
• lead from lead-based
paints,
• crystalline
silica from bricks and cement and other masonry products, and
• arsenic and chromium
from chemically-treated
lumber.
Your risk from these exposures
varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals:
work in a well ventilated
area, and work with approved safety
equipment,
such as those dust masks that are specially designed to filter out microscopic
particles.
SAVETHESEINSTRUCTIONS
Blade Diameter
Blade Arbor
Cutting Depth at 0° Bevel Cut
Cutting Depth at 45 ° Bevel Cut
5-1/2 in. (140 mm)
No Load Speed
4,000 RPM
3/8 in. (10 mm)
Motor
18 Volt DC
1-9/16 in. (40 mm)
Charge Rate
1 Hour
1-1/8 in. (29 mm)
Charger Rating
120 volts, 60 Hz, AC
Your trim saw has been shipped completely
assembled except for the blade. Inspect it carefully to
make sure no breakage or damage has occurred
during shipping. If any parts are damaged or missing,
contact your nearest Sears Retail Store to obtain
replacement parts before attempting to operate saw. A
blade, blade wrench, rig guide and this operator's
manual are also included.
,_
WARNING:
If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
The following recommended
accessories are currently available at Sears Retail Stores.
•
5-1/2 in.
Thin Kerr Blade
,_
WARNING:
The use of attachments or accessories
not listed might be hazardous.
Advertisement
