Advertisement
Available languages
Available languages
6.
After the water has been drained,
close the drain valve (clockwise).
The air compressor
can now be
stored.
NOTE: If drain valve is plugged,
release all air pressure. The valve
can then be removed, cleaned, the
reinstalbd.
Air Filter = Inspection
and
Risk of Burns.
Compressor
head
and cylinder
sleeve are very hot.
Bo not touch. AHow compressor
to
coom prior to servicing,
Risk of Unsafe
Operation,
Keep
the air filter clean at atl times.
Do
not operate
the air compressor
with
the air fimter removed,
A dirty air filter will not allow the
compressor pump to operate at
fulI capacity. Before you use the
compressor pump, check the air filter
to be sure it is clean and in place.
If it is dirty, replace it with a new filter.
On some models,the filter may be
removed by using a pair of needle
nose pliers or a screwdriver. Pull or
pry out the old filter and carefully
clean the filter area. Push in the new
air filter.
Air Compressor
Pump
Intake
and Exhaust
Valves
Once a year have a Trained Service
Technician check the air compressor
pump intake and exhaust valves.
Motor
The motor has an automatic reset
thermal overload protector. If the
motor overheats for any reason, the
overload protector will shut off the
motor. The motor must be allowed
to cool down before restarting.
The
compressor
wilI automatically
restart
after the motor cools.
if the overload protector shuts the
motor off frequently, check for a
possible voltage problem.
Low
voltage can also be suspected
when:
1.
The motor does not get up to full
power or speed.
2.
Fuses blow out when starting
the motor; lights dim and remain
dim when motor is started and is
running.
A09709
16= ENG
Advertisement
