Advertisement
Available languages
Available languages
H
1.
Remove unit from carton and
discard all packaging.
HOW TO SET UP YOUR
UNmT
Location
of the Air Compressor
Locate the air compressor
in a
clean, dry and well ventilated area.
The air compressor
should be
located at least 12" away from the
wall or other obstructions
that will
interfere with the flow of air. The
air compressor
pump and shroud
are designed to allow for proper
cooling. The ventilation openings
on the compressor
are necessary
to maintain proper operating
temperature.
Do not place rags or
other containers on or near these
openings.
IMPORTANT: The outlet being used
must be installed and grounded in
accordance
with atI local codes and
ordinances.
2.
Make sure the outlet being used
has the same configuration
as the grounded plug. DO
NOT USE AN ADAPTER, See
illustration.
GROUNDmNG INSTRUCTIONS
SHOCK,
In the event of a short
circuit,
grounding
reduces the risk
of shock by providing
an escape
wire for the electric
current.
This
air compressor
must be properly
grounded.
The portable air compressor
is
equipped with a cord having a
grounding wire with an appropriate
grounding plug (see foIIowing
iIhstrations).
The plug must be used
with an outlet that has been installed
and grounded in accordance
with all
local codes and ordinances.
1.
The cord set and plug with this
unit contains a grounding pin.
This plug MUST be used with a
grounded outlet.
3.
4.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
If these grounding instructions
are not completely
understood,
or if in doubt as to whether
the compressor
is properly
grounded, have the installation
checked by a qualified
electrician.
SHOCK, IMPROPER
GROUNDING
CAN RESULT IN ELECTRICAL
SHOCK,
Do not modify the plug provided.
If
it does not fit the available
outlet,
a correct
outlet
should be installed
by a qualified
electr{cian.
Repairs to the cord set or p_ug
MUST be made by a qualified
emectrician.
A09709
10- ENG
Advertisement
