Interfaces And Connectors; External Ports; Lan Connector - Fujitsu Siemens Computers D1931 Technical Manual

Interfaces and connectors

The positions of the interfaces and connectors are shown on page "Cover".
The components and connectors marked are not necessarily present on the mainboard.

External ports

The positions of the external ports are shown on page "Cover".
PS/2 keyboard port, purple
Serial interface, turquoise
Monitor port, blue
LAN
LAN connector (optional)
Audio output (Line out), light green

LAN connector

The mainboard is optionally equipped with the Broadcom BCM5751 LAN controller. This LAN
controller supports the transfer rates 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s. The LAN controller
supports the WOL functionality through Magic Packet
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® BootP and
Intel PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
LED 1 lights green - a connection exists (e.g. to a hub). LED is blinking green: activity
LED 2 lights up differently depending on the transfer rate:
10 Mbit/s off
100 Mbit/s green
1000 Mbit/s yellow
A26361-D1931-Z120-1-7419, Edition 1
Audio input (Line in), light blue
PS/2 mouse port, green
Parallel port/Printer, burgundy
USB - Universal Serial Bus, black
Microphone jack (mono), pink
TM
.
2
1
English - 9