Fujitsu MAP3147 Scsi Logical Interface Specifications page 108

Command Specifications
(1) Page code
This field indentifies which log page is being transferred.
The log pages that can be transferred by this command are shown below.
Page Code
01 Buffer Overrun / Underrun Page
02 Write Error Counter Page
03 Read Error Counter Page
05 Verify Error Counter Page
06 Non-medium Error Page
0D Tempature Page
0E Start-stop Cycle Counter Page
0F Application Client Log Page
10 Self-Test Result Log Page
(2) Page length
This field specifies the length in bytes of the following log parameters. If the application client sends
a page length that results in the truncation of any parameter, the device server terminates the
command with CHECK CONDITION status (ILLEGAL REQUEST [=5] / Invalid field in paramter
list [=26-00]).
The log pages contain one or more special data structures called log parameters as shown below. Each log
paramter begins with a 4-byte parameter header followed by one or more bytes of "Parameter Value" data.
Bit
Byte
0
1
2
3
4
~ ~
n
3 - 46
Description
7 6 5
DU DS TSD
Parameter Value
Changable Parameter
Disable
Enable
Enable
Enable
Enable
Disable
Enable only 0002
Enable
Disable
4 3
Parameter Code (MSB)
Parameter Code (LSB)
ETC TMC
Parameter Length
2 1 0
LBIN LP
~
C141-E167