Intel Matrix Storage Manager Option Rom Utility - Asus Rampage Extreme - Motherboard - ATX User Manual

Intel Matrix Storage Manager option ROM utility
®
The Intel ® Matrix Storage Manager Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 0+1), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
Intel(R) Matrix Storage Manager Option ROM v8.0.0.1027 ICH9R wRAID5
1. Create RAID Volume
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
[↑↓]-Select
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
4-42
® Matrix Storage Manager option ROM utility:
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
2. Delete RAID Volume
[ DISK/VOLUME INFORMATION
Serial #
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
[ MAIN MENU ]
3. Reset Disks to Non-RAID
4. Exit
Size
XX.XXGB
XX.XXGB
XX.XXGB
XX.XXGB
[ESC]-Exit [ENTER]-Select Menu
]
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 4: Software support