Cleaning The Overflow Filter - Haier XPB60-287S User Manual

Care and cleaning

Cleaning the overflow filter

Too much lint on the overflow filter will influence
the normal usage of the machine. Please
clean it every two months.
1 Take off the overflow filter.
As indicated in the figure,
the elastic fixing claw and pull it in
the direction of the arrow .
(See to Figure 1)
2. Remove the corrugated pipe.
Dismantle the upper part of the
corrugated pipe
overflow filter ( as indicated in
Figure 2).
3. Cleaning the overflow filter
Clean the lint around the filter
and flush with tap water.
4. Install the overflow filter.
(1).Install the corrugated pipe.
(2).Insert the mounting plate at
the bottom of the filter into
the valve cover.
(3).Hang up the hook at the left
upper side.
(4).Push the upper part in as
indicated in Figure 3.
squeeze
inside the
11
Elastic fixing
claw
Figure 1
Water level
adjusting lever
Figure 2
Hook
Figure 3
Corrugated
Pipe