Setting Chap Authentication - Fujitsu ETERNUS DX Disk User Manual

Chapter 6 Setting Up the VMware ESX Server
6.1 For VMware vSphere
6.1.7

Setting CHAP Authentication

CHAP and mutual CHAP authentication can be set for VMware ESX connections.
Log in to VMware ESX from the vSphere Client, check whether the ETERNUS DX Disk storage system LUNs
have been recognized, and then enable the CHAP authentication.
The procedure is as follows:
1
Select the [Configuration] tab on vSphere Client and select [Storage Adapters].
2
Select the target iSCSI Software Adapter and click [Properties].
3
Select the [General] tab and click [CHAP].
4
Set CHAP.
When setting CHAP only
•
Select [Required] for [Select option:] under "CHAP" and set the [Name:] and [Secret:].
• When setting CHAP and mutual CHAP
Select [Required] for [Select option:] under "CHAP" and "Mutual CHAP" and set the [Name:] and [Se-
cret:].
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
29
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0