Fujitsu ETERNUS DX Disk User Manual page 6

Preface
SUSE Linux Enterprise Server 9 for x86 Service Packx
-
SUSE Linux Enterprise Server 9 for EM64T Service Packx
-
■
Other names
"iSCSI port" refers to the iSCSI interface module used in the ETERNUS DX Disk storage systems to connect to
•
the server.
"LAN card" refers to the iSCSI interface module normally used in the server. An "onboard LAN", "network
•
interface card" (NIC), "LAN adapter", or "LAN board" may be used instead.
"iSCSI cable" refers to the cable that is used to connect the ETERNUS DX Disk storage systems and server
•
over an iSCSI interface. "Ethernet cable", "LAN cable", and "twisted pair cable" are alternative names for this
cable.
"VMware ESX" refers to "VMware vSphere" and "VMware Infrastructure 3", which are datacenter solutions
•
from VMware that virtualize the storage and networking system. The name "VMware vSphere" and
"VMware Infrastructure 3" are used in specific datacenter sections.
Italics are used to show variables such as values and characters that appear in command parameters and
•
output examples.
■
ETERNUS Disk storage system models
The following naming conventions are used to describe ETERNUS Disk storage system models in this manual.
ETERNUS Disk storage system model
ETERNUS DX60 S2/DX80 S2/DX90 S2
ETERNUS DX410 S2/DX440 S2
ETERNUS DX8100 S2/DX8700 S2
ETERNUS DX60/DX80
ETERNUS DX410/DX440
ETERNUS DX8100/DX8400/DX8700
ETERNUS DX60/DX80
ETERNUS DX410/DX440
ETERNUS DX8100/DX8400/DX8700
ETERNUS DX410 S2/DX440 S2
ETERNUS DX8100 S2/DX8700 S2
ETERNUS DX410/DX440
ETERNUS DX8100/DX8400/DX8700
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
Naming conventions
ETERNUS DX Disk storage system
ETERNUS DX Disk storage system (excluding S2)
ETERNUS DX400 S2 series
ETERNUS DX8000 S2 series
ETERNUS DX400 series
ETERNUS DX8000 series
6
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0