Fujitsu ETERNUS DX Disk User Manual page 10

Chapter 1 Workflow
1.1 For the ETERNUS DX Disk storage system
Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX Disk Storage System
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX Disk storage system.
"Chapter 4 Installing and Setting Up ETERNUSmgr" (page 18)
•
• "Chapter 5 Setting Up the ETERNUS DX Disk Storage System " (page 19)
Checking the Web GUI operational procedures
•
"Web GUI User's Guide"
-
Installing ETERNUSmgr
•
"ETERNUSmgr Install Guide"
-
• Checking the ETERNUSmgr operational procedures
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS DX Disk storage system
•
- "ETERNUS DX Disk storage systems User's Guide -Server Connection- (iSCSI) Disk Storage System
Settings (ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/DX8700
S2)"
- "ETERNUS DX Disk storage systems Server Connection Guide (iSCSI) ETERNUS DX Disk Storage Sys-
tem Settings for ETERNUS DX60/DX60 S2, DX80"
"ETERNUS DX Disk storage systems Server Connection Guide (iSCSI) ETERNUS DX Disk Storage Sys-
-
tem Settings for ETERNUS DX400/DX8000 series"
Setting Up the VMware ESX Server
Install the LAN card in the server, then set up the VMware ESX server to recognize LUNs.
• "Chapter 6 Setting Up the VMware ESX Server " (page 20)
Starting the Virtual Machine
Notes on Virtual Machine operation and related settings are given in this manual and other docu-
ments.
• "Chapter 7 Virtual Machine " (page 38)
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
10
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0