Printing From A Camera - Epson Artisan 700 Series Basic Manual

■
Print Settings
■
Photo Adjustments
When you're done selecting settings, press
12. When you're ready to print, press x
To cancel printing, press y

Printing From a Camera

If you have a digital camera that supports PictBridge
to the Artisan 700 Series and print your photos directly from the camera. Check
your camera manual to see if it is compatible.
Your photos must be in JPEG format and sized from 80 × 80 to 9200 × 9200 pixels.
Note:
Epson cannot guarantee the compatibility of any cameras. Some combinations of paper
types, sizes, and layouts may not be supported, depending on your camera and the
Artisan 700 Series settings.
1. Remove any inserted memory card from the Artisan 700 Series.
2. Connect the USB cable that came with your camera to the
connector on the front of your Artisan 700 Series.
3. Turn on your camera. You see a connection message on the Artisan 700 Series
display screen.
4. Load Epson photo paper (see page 7).
5. Press the
Home
24
Printing From Your Camera's Memory Card
to change the paper type and size, or other print settings
to turn on red-eye reduction or other features
Stop/Clear Settings
button until
Setup
.
OK
.
Start
.
™
printing, you can connect it
is selected, then press
USB
.
OK