Removing Your Card - Epson Artisan 700 Series Basic Manual

Make sure the image files on your card meet these requirements:
File format
Image size
Number of files
2. After you insert the card, the memory card
access light flashes, then stays on.
3. See page 20 to select and print your photos.

Removing Your Card

After you finish printing your photos, follow these steps to remove the card:
1. Make sure the memory card access light is not flashing.
Caution:
Do not remove the card or turn off the Artisan 700 Series while the memory card
access light is flashing; you may lose data on the card.
2. If the Artisan 700 Series is connected to your computer, do one of the
following before removing the memory card or turning it off:
■
Windows
remove USB Mass Storage Device
■
Macintosh
trash.
3. Pull the card straight out of its slot.
18
Printing From Your Camera's Memory Card
JPEG with the Exif version 2.21 standard
80 × 80 pixels to 9200 × 9200 pixels
Up to 9990 (If there are more than 999 photos on the
card, you can select a group of photos to display.
See your on-screen Epson Information Center.)
®
:Click the or
®
:Drag the removable disk icon from your desktop into the
Memory card access light
icon on the taskbar and select
.
Safely