Craftsman 919.152390 Owner's Manual page 3

_'J :(a_ 13 [o-7-_ i [o] _I[a_: r-! :t
Model No. 919-152390
Bore 1.875"
Stroke 1.25"
Voltage/Hertz/Phase 120V/60/1
Minimum Branch Circuit Requirement 15 amps
Fuse Type Time Delay
Air Tank Capacity (gallons) 1.5
Approx. Cut-In 120
Approx. Cut-out 150
SCFM @ 40 psig 3.0
SCFM @ 90 psig 2.0
B'T:I d =i ib'd[€'IlJl,] _ NI_I:_ *- I,] _ all,lid [o]_
This manual contains information that is important for you to know and understand. This information
relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To he_p you
recognize this information, we use the symbols below. Please read the manua_ and pay attention to
these sections.
Im 4" Ind 'C::n l;hazardous
situation which, if not avoided, will
result in death or serious injury.
_Jl_lndicates a potentially
hazardous situation
which, if not avoided, _ result in
death or serious injury.
_"_J_lndicates a potentially
hazardous situation
which, if not avoided, _ result in
minor or moderate injury.
_"_lt Used without the
safety alert symbol
indicates a potentially hazardous
situation which, if not avoided, may
result in property_ damage.
SAVE THESE INSTRUCTIONS
IMPROPER OPERATION OR MAINTENANCE OF THIS PRODUCT COULD RESULT IN
SERIOUS INJURY AND PROPERTY DAMAGE. READ AND UNDERSTAND ALL
WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT.
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:
_ead from lead-based paints
crystalline silica from bdcks and cement and other masonry products
arsenic and chromium from chemicai_y-treated _umber
Your risk from these exposures vanes, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a wel_ ventilated area, and work with approved safety
equipment, always wear MSRNNIOSR approved, properly f_tting face mask or respirator when using
such tools.
When using air tools, basic safety precautions should always be foilowed to reduce the risk of of
personal iniury.
3-ENG D29477