Fujitsu ETERNUS DX Disk User Manual page 14

Chapter 1 Workflow
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX Disk
storage system.
"Chapter 9 Setting Up the Server to Recognize the Logical Units " (page 26)
•
When the ETERNUS Multipath
Driver is used or when the Mul-
tipath Driver is not used
Creating a File System
Create a file system.
"Chapter 11 Setting a File System" (page 30)
•
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
When VERITAS Volume Manager
is used
Installing VERITAS Volume
Manager
Install and set up the VERITAS
Volume Manager software.
Installing and setting up the
•
VERITAS Volume Manager
Documentation provided
-
with the product
• Checking the corresponding
Multipath Driver
"Server Support Matrix"
-
14
Copyright 2013 FUJITSU LIMITED
When the device-mapper multi-
path is used
Setting Up the device-mapper
multipath
Set up and confirm the device-
mapper multipath.
"Chapter 10 Setting Up and
•
Checking the Multipath Driv-
er" (page 29)
Setting up the device-mapper
•
multipath
"ETERNUS DX Disk storage
-
systems User's Guide -Serv-
er Connection- (Fibre Chan-
nel/FCoE/iSCSI/SAS) for Li-
nux device-mapper multi-
path"
P3AM-3842-12ENZ0