Fujitsu ETERNUS DX Disk User Manual page 12

Chapter 1 Workflow
Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX Disk Storage System
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX Disk storage system.
"Chapter 4 Installing and Setting Up ETERNUSmgr" (page 20)
•
• "Chapter 5 Setting Up the ETERNUS DX Disk Storage System" (page 21)
Checking the Web GUI operational procedures
•
"Web GUI User's Guide"
-
Installing ETERNUSmgr
•
"ETERNUSmgr Install Guide"
-
• Checking the ETERNUSmgr operational procedures
"ETERNUSmgr User Guide"
-
Setting up the ETERNUS DX Disk storage system
•
- "ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) Disk Storage
System Settings (ETERNUS DX80 S2/DX90 S2, ETERNUS DX410 S2/DX440 S2, ETERNUS DX8100 S2/
DX8700 S2)"
- "ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk
Storage System Settings for ETERNUS DX60/DX60 S2, DX80, DX90"
"ETERNUS DX Disk storage systems Server Connection Guide (Fibre Channel) ETERNUS DX Disk
-
Storage System Settings for ETERNUS DX400/DX8000 series"
Setting up the Fibre Channel switch
If a Fibre Channel switch is to be used, set it up now.
• "Chapter 6 Setting Up the Fibre Channel Switches " (page 22)
Setting up the Fibre Channel switch
•
"ETERNUS DX Disk storage systems User's Guide -Server Connection- (Fibre Channel) Fibre Channel
-
Switch Settings"
• Checking the Fibre Channel switch connection requirements
"Server Support Matrix for FC-SWITCH"
-
ETERNUS DX Disk storage systems User's Guide -Server Connection-(Fibre Channel) for Linux
12
Copyright 2013 FUJITSU LIMITED
P3AM-3842-12ENZ0