palmOne Treo 650 Using Instructions page 31

Connecting your Treo smartphone to your computer
1. Plug the AC charger into a wall outlet. If necessary connect an adapter.
2. Plug the USB sync cable into an available USB port or a powered USB hub on
your computer.
3. Connect the sync cable to the Multi-connector on the bottom of your Treo
smartphone with the sync button facing up. Do not press the sync button until
you are instructed to do so.
4. Connect the charger cable to the Multi-connector on the USB sync cable.
A
A. USB sync cable
B. Sync button
B
For best performance, plug
your sync cable directly
into a USB port on your
computer. If you use a USB
hub, make sure it is a
powered hub.
Setting up your computer :: 29