Getting Started; Battery Information; Charging Your Battery; Desktop Charger - Motorola CP040 Basic User's Manual

Commercial series
Hide thumbs Also See for CP040:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

GETTING STARTED

BATTERY INFORMATION

Charging Your Battery

If a battery is new, or its charge level is very low, you
will need to charge it before you can use it. When
the battery level is low and the radio is in transmit
mode you will see the LED indicator flash red. Upon
release of the PTT button, you will hear an alert
tone.
Note: Batteries are shipped uncharged from the
factory. Always charge a new battery 14 to 16
hours before initial use, regardless of the
status indicated by the charger.

Desktop Charger

To Charge the Battery
1
Turn the radio off.
2
Place the battery, with or without the radio, in
the charger pocket.
The charger LED indicates the charging
progress.
LED color
No LED Indication
Battery inserted incorrectly
or battery not detected.
Single Green Flash
Successful charger
power-up.
a
Flashing Red
Battery unchargeable or not
making proper contact.
Red
Battery is charging.
Flashing Yellow
Battery in charger but
waiting to be charged. The
battery temperature may be
too hot or too cold. The
voltage may be lower than
the predetermined threshold
level for charging.
b
Flashing Green
Battery 90% (or more)
charged.
Green
Battery fully charged.
a Remove and replace the battery in the charger.
If the LED indicator continues to flash red,
consult your dealer.
b A standard battery may require 90 minutes to
charge to 90% capacity.
Status
English
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp 140

Table of Contents