Tools And Equipment - Fujitsu SPARC Enterprise M4000 Installation Manual

2.3

Tools and Equipment

The following sections list the tools that are required to install the servers.
The following tools are required to install the servers:
Screwdriver, Phillips No. 2
■
Antistatic wrist strap
■
Antistatic mat
■
Ethernet cable of category 5 or higher
■
Console (one of the following)
■
■
■
■
■
XSCF Unit configuration information (IP Address, subnet mask, default gateway,
■
and so on.)
Domain configuration information (IP Address, subnet mask, default gateway, and
■
so on.)
ASCII terminal
Workstation
Terminal server (or patch panel connected to a terminal server)
Personal computer
Chapter 2 Preparing to Install the Server 2-9