Using The Showhardconf Command - Fujitsu SPARC Enterprise M3000 Installation Manual

B.3.1

Using the showhardconf Command

The showhardconf command displays the following information about each FRU:
Current configuration and status
■
Number of installed FRUs
■
Domain information
■
Name properties of PCI cards
■
When you use the showhardconf command to show the FRU configuration and
status information and the domain information, it displays any of the status
described below. Beside a unit failed or degraded, placed an asterisk (*) indicating
the locating fault.
Faulted: The component is faulty and is not operating.
■
Degraded: The component is operating. However, either an error has been
■
detected or the component is faulty. As a result, the component might be
operating with reduced functionality or performance.
Deconfigured: As a result of another component's faulted or degraded status,the
■
component is not operating. (The component itself is not faulted or degraded.).
Maintenance: The component is under maintenance. A deletefru
■
(8),replacefru (8), or addfru (8) operation is currently underway.
Normal: Operating normally.
■
B-4 SPARC Enterprise M3000 Server Installation Guide • January 2009