Connectors - Intel D810E2CA3 Specification

Intel Desktop Board D810E2CA3 Technical Product Specification

2.8 Connectors

CAUTION
Only the back panel connectors of this D810E2CA3 board have overcurrent protection. The
internal D810E2CA3 board connectors do not have overcurrent protection; they should connect
only to devices inside the computer chassis, such as fans and internal peripherals. Do not use
these connectors for powering devices external to the computer chassis. A fault in the load
presented by the external devices could damage the computer, the interconnecting cable, and the
external devices themselves.
This section describes the board's connectors. The connectors can be divided into the following
groups.
Back panel I/O connectors (see page 49)
PS/2 keyboard and mouse
LAN (optional)
USB (two)
VGA
Parallel port
Serial port A
Audio (line out, line in, and mic in)
Internal I/O connectors (see page 53)
Audio (ATAPI CD-ROM, ATAPI-style auxiliary line in, front panel audio)
Digital video interface (optional)
Fans (two)
Power
Wake on LAN technology (optional)
Add-in boards (one CNR connector and four PCI bus connectors)
Diskette drive
IDE (two)
External I/O connectors (see page 63)
Serial port B
Front panel USB (one connector, two ports)
Front panel (power/sleep/message-waiting LED, power switch, hard drive activity LED,
reset switch, infrared port, and auxiliary front panel LED)
48