Advertisement
Color Shading Correction
g
Color (shading) variations between the center and edges of the frame can be adjusted
separately for each corner.
To use color shading correction, follow the steps below.
1
Choose a corner.
Rotate the command dial to choose a corner. The selected corner is indicated by a
triangle.
2
Adjust shading.
Use the selector to adjust shading until there is no visible diff erence in color be-
tween the selected corner and the center of the image. Press the selector left or
right to adjust colors on the cyan–red axis, up or down to adjust colors on the blue–
yellow axis. There are a total of 19 positions available on each axis.
R To determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray
paper.
Peripheral Illumination Correction
Choose from values between –5 and +5. Choosing positive values increases peripher-
al illumination, while choosing negative values reduces peripheral illumination. Posi-
tive values are recommended for vintage lenses, negative values to create the eff ect
of images taken with an antique lens or a pinhole camera.
R To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a
sheet of gray paper.
SET
CANCEL
SET
CANCEL
SET
CANCEL
0
SET
CANCEL
Advertisement
