Rear View Of The Server - Lenovo ThinkServer RD630 Hardware Maintenance Manual

Rear view of the server

This topic provides information to help you locate the connectors and components on the rear of your server.
The following illustration shows the rear view of the server.
Figure 13. Rear view of the server
1
Hot-swap redundant power supply 2 (available
some models)
2
Hot-swap redundant power supply 1
3
PCI Express card area for cards on the riser card
assembly 2
4
PCI Express card area for cards on the riser card
assembly 1
5
Ethernet connector 2 (RJ-45)
6
Four USB connectors
1 Hot-swap redundant power supply 2 (available in some models)
2
Hot-swap redundant power supply 1
The hot-swap redundant power supplies help you avoid significant interruption to the operation of the
system when a power supply fails. You can purchase a hot-swap redundant power supply option from
Lenovo and install the power supply to provide power redundancy without turning off the server.
On each hot-swap redundant power supply, there is a status LED near the power cord connector. When the
LED is lit in green, it indicates that the hot-swap redundant power supply is working correctly. When the LED
is lit in amber, it indicates that the hot-swap redundant power supply is likely to fail or has failed.
7
VGA DB-15 connector
8
Ethernet connector 1 (RJ-45)
9
Ethernet connector 0 for system management (RJ-45)
10
Serial port
11
ID LED
.
Chapter 3 Product overview
25