Table of Contents
Advertisement
The VTech VT 191 0c was designed to
accommodate this situation. If you
need to temporarily add a long distance
andlor area code (such as 1503)
beforetheCID number, dothe following:
Beginning from the standby mode,
key in the necessary digits. Your
display will look like this:
Then, to temporarily add the last 7
Using the A (*) and
V
(#) keys,
scroll through the received calls to
locate the number you wish to dial.
Once you have located the number
you wish to dial, simply press
PHONE. The last seven digits will
be added to the numbers already
in the LCD, and the whole number
shown below will be automatically
dialed.
Special Message Indicators
Out of Area Calls
If for any reason the telephone number
of the caller is unavailable, or if the
caller is outside the CID service area,
the message UNAVAILABLE is dis-
played on the LCD.
"Private" Calls
If the caller has exercised the option
to block his or her number from being
sent, then the display will show
PRIVATE.
Transmission Error
If an error is detected then the CID
information is incomplete and will
not be displayed. "TRANSMISSION
ERROR" will be displayed on the LCD
screen.
L
J
The occasional appearance of
"TRANSMISSION ERROR" on your
display does not indicate a problem
with your unit or your telephone line.
However, if this appears frequently,
you may want to notify your telephone
company.
Reviewing Numbers
Calls stored in memo
can be
reviewed by pressing
h.
The
display will show the number of the
most recent call. The top line of the
display is used to indicate the
memory location number and the
bottom line of the display shows the
name, see below:
There may be additional characters
in the name which can not be
shown on the current display. Press
the
A
( 9 ) key. This will overwrite
the CID memory location on the top line
to show up to a maximum of 15 alpha
characters for the duration of the
key press. The first 12 alphacharacters
will be on the top line with up to 3
additional characters on the second
line.
REVIEWING CID PHONE
NUMBERS
PRESS
0
PRESS
@
OR
@
TO SCROLL
PRESS & HOLD @TO
VIEW PHONE NUMBER
Once the view key is released, the
display returns back to normal.
To find out the corresponding phone
number as well as the date and
time of the call, press and hold
the 7
@
key. The date and time will
be shown. Releasing the key will again
show the caller's name.
Pressing the
( A
(f) key) displays the
next lower in sequence call record.
Likewise, pressing the (
v
(#) key)
displays the next higher in sequence)
call record
To save you time in reviewing call
records, you can "wrap-around the
call history log. For example, if you
press the
A
(f) key enough to scroll
back to the first record, pressing it
again will force the display to go to the
very end of the call record.
Advertisement
Table of Contents
