Table of Contents
Advertisement
CALLER ID (CID)
However, when you dial directly from
Caller ID (CID) memory, only the last
7 digits of the received telephone
number will be used. Consequently,
you would actually dial this:
The VTech VT1970ci was designed to
accommodate this situation. If you
need to temporarily add a long dlstance
prefix and /or area code (such as 1503)
before the Caller ID (CID) number, do
the following:
•
Beginning from the standby mode,
key in the necessary digits. Your
display will look like this:
•
Then, to temporarily add the last 7
digits only from a Caller ID (CID)
memory, press CID .
•
Using the
( ) and
*
scroll through the received calls to
locate the number you wish to dial.
•
Once you have located the number
you wish to dial, simply press
PHONE . The last seven digits will
be added to the numbers already
in the display, and the whole
number shown below will be auto-
matically dialed.
vt1970ci/hjmannual
Special Message Indicators
Out of Area Calls
If for any reason the telephone number
of the caller is unavailable, or if the
caller is outside the Caller ID (CID)
service area, the message UNAVAIL-
ABLE is displayed.
"Private" Calls
If the caller has exercised the option
to block his or her number from being
sent, then the display will show
PRIVATE.
Transmission Error
If an error is detected, the Caller ID
(CID) information is incomplete and
will not be displayed. "TRANSMISSION
ERROR" will be displayed.
(#) keys,
The occasional appearance of
"TRANSMISSION ERROR" on your
display does not indicate a problem
with your unit or your telephone line.
However, if this appears frequently,
you may want to notify your telephone
company.
28
28
1/29/99, 12:50 PM
Advertisement
Table of Contents
