Arming And Disarming; Active Arming - Lock & Arm; Active Disarming - Unlock & Disarm - Auto Page C3-RS-730 LCD Operation Manual

3. Trigger Alarming
4. Passive
Starter
Disable
5. Panic Alarming
6. Car-Jacking Alarming
7. Car Locator 6 Chirps
E. ACTIVE ARMING – LOCK & ARM:
button
1. Press on the transmitter.
2.
The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle's doors will lock upon arming if interfaced with the security system.
DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the transmitter
disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the
vehicles parking lights only.
SENSOR BY-PASS:
The sensor bypass feature is programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle.
Sensor By-Pass : Press the
by-pass the shock sensor.
HIDDEN ALARM FUNCTION: Silent Alarm
Press the button first; within 3 seconds press the
security system will arm and with "Hidden Alarm Function" The siren / horn will be silenced even if the
sensor is triggered in the armed status.
F. PASSIVE ARMING (Programmable)
Active arming / disarming is controlled by your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature which allows the security system to arm 30
seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the "OFF" position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle
entrances are closed.
3. After the 30-second time has elapsed, the security system will automatically "ARM". The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
The vehicle doors will automatically lock after the passive arming cycle has been completed.
PASSIVE ARMING BY -PASS: While the system is disarmed, Press the
with [1] chirp and LED will turn "ON". The security system will remain in this temporary state for as long as you wish.
To exit passive by-pass, press the transmitter
G. ACTIVE DISARMING – UNLOCK & DISARM:
1. Press button on the transmitter.
2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed.
The vehicle's doors will unlock and the dome light will turn on for 30 seconds upon disarming. (Note: Power door
locks and dome light must be installed with the security system.)
Flashes Slow Flash
Fast Flash
Flashes
Flashes
12 Flashes Locking
button two times within 5 seconds will arm the security system and
Alarm indication will only appear on the LCD Transmitter.
or buttons and the system will return to normal status.
5
Disable Flashes
Disable
Flashes
Disable Flashes
and buttons at the same time. This will arm or
button to activate the hidden alarm function. The
button twice, the system will respond