Autopage C3-RS-665 Installation Manual page 21

Professional remote car starter & 2 channel security / alarm system with two way data port
Hide thumbs Also See for C3-RS-665:
Table of Contents

Advertisement

One Chirp /
LED one
Press
pulse
Transmitter
Factory
Button
Default
Setting
Pathway
illumination
1
feature "off"
Ignition
controlled
2
door locks &
unlocks
0.8 second
door lock &
3
unlock
Five Chirps = 0.8 second Lock, double 0.8 second Unlock
Six Chirps = Double 0.8 second Lock, 0.8 second Unlock
Seven Chirps = Door lock with "Comfort Feature"
Eight Chirps = DBI Two step unlock ( DBI ONLY )**
Nine chirps = DBI Unlock ALL doors ( DBI Only )**
**Select either of these options when using Autopage Two Way
Data Bus Interface Only. For use with ADS CI3 Compatible data
modules and/or CI3 Telematics Module.
H2/4 Brown
Wire = (+)
4
Constant
Siren output
3 Hours
5
+
Timer Start
The Vehicle
without
Turbo
(The system
6
+
Cannot be
armed with
the engine
running)
2nd Channel
7
+
Pulsed
Two Chirps /
LED two pulses
Parking light turn
"on" for 30-
second upon an
unlock signal
Ignition controlled
door locks only
3.5 second door
lock & Unlock
H2/4 Brown Wire
= (+) Pulsing
Output
(Relay Required
for [-] Horn)
2 Hours Timer
Start
The Vehicle with Turbo (The system Can be Armed with
the engine running)
The shock sensor
will be by-passed
upon engine
running.
(The engine will
run by itself after
the ignition is
turned off)
Five chirps = Press
time to control Engine run time for 3 minutes and the
shock sensor will be by-pass upon engine running.
Six chirps = Press
time to control Engine run time for 5 minutes and the
21
shock sensor will be by-passed upon engine running.
2nd Channel
Momentary
Three Chirps /
Four Chirps /
LED three
LED four
pulses
pulses
Parking light
turn "on" for 30-
second upon an
unlock signal &
10-second
upon a lock
signal.
Without
Ignition
ignition
controlled door
controlled
unlocks only
door locks &
unlocks
0.8 second
0.8 sec. dbl
Lock,
Lock,
0.35 second
0.8 sec. dbl
Unlock
Unlock
Press
The shock
the same time
sensor by -pass
to control
3minutes after
Engine run
armed.
time for 1
(The engine will
minute and
run by itself
the shock
after the ignition
sensor will be
is turned off)
by-passed
upon engine
running.
and
buttons at the same
and
buttons at the same
and
buttons at

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents