NEC Versa P520 Disassembly Manual page 28

9. Separate the LCD from the bottom cover.
10. Turn upside down the LCD and disconnect the LCD (B) cable and the inverter
connector (A) as shown in the following picture.
Fig. 50: Disconnecting the LCD cable and the inverter
11. Put aside the inverter board and disconnect carefully the LCD cable from the panel
and put it aside.
Fig. 51: Removing the LCD flat cable from the panel
12. Remove on both sides of the LCD the four screws (4) in order to remove the left and
right hinges assembly.
NEC Versa P520 Disassembly Manual Page 28