Using Ethertalk - Oki B6500 Network Manual

U E T
SING THER
This section provides information on the possible causes, verifying
methods and recommended actions pertaining to errors which may
occur when the printer is used with EtherTalk.
PROBLEM
The name (or the
default name) of the
printer has been
changed.
The printer does not
appear in Chooser.
Continued
ALK
Cause
Verification
Action
Cause 1
Verification 1
Action 1
Cause 2
B6500 Network Guide> 56
TREATMENT
The Apple Talk function of the printer
name if it detects that a printer of the
same name exists on the network.
Check Chooser to confirm that the
printer name has been changed.
Change the name of the printer or
change the name of the other printer
to avoid duplicate printer names on
the network.
In Chooser, only the NBP entity name
of which entity type is Laser/Writer is
displayed.
The printer is set up as a slave of the
Apple Share Print Server or the Win-
dows NT Server and the NBP entity
name of the printer has been
changed from LaserWriter.
Use of a network management appli-
cation software, such as Apple Inter-
Pole, and check that the type of the
NBP entity name of the printer has
been changed from LaserWriter.
If the type of NBP entity name of the
printer has been changed from
Laser/Writer, the printer cannot be
selected in the Chooser. If the printer
must be selected, open the printer
using the Apple Share Print Server or
the Windows NT Server.
The Macintosh printer driver searches
for a printer with the printer name
specified in the Chooser and the zone
name of Apple Talk.
If the network is not connected cor-
rectly, the printer cannot be found.