Sample; Delete (Cancel); Command Format; Command Options - Oki B6500 Network Manual

Sample

To print a file named "file1" to a printer set up as "P001", enter the
following command:
%lp -d P001 file1
To output three copies of "file1" and "file2" to "P001", enter the
following:
$lp -d P001 -n3 file1 file2
D (C )
ELETE ANCEL
This cancel command is used to delete print data which has been
sent to print.

Command Format

cancel [Printer name] [Job Number]

Command Options

The following command options are available:
Printer name
This option specifies the printer name. The "cancel" command can
be effectively used with the combined use of -a, -e and -u as shown
below. This option is invalid in the non-spool mode.
-a
Deletes all the print data, sent by a user who issues this command,
from the data which has been received by a specified printer.
-e
Deletes all the print data received by a specified printer.
-u user name
Deletes all the print data sent by a specified user and received by a
specified printer.
B6500 Network Guide> 32