Using EtherTalk
(For Mac OS X 10.3.9 to 10.4.11)
When connecting to the network with EtherTalk,
it is necessary to enable EtherTalk and disable
the sleep mode on the printer. After doing that,
install the driver on the computer.
Memo
● The following procedure uses Mac OS X 10.4.11 as an
example. Depending on an OS, the description may be
different.
First, enable EtherTalk and disable the
sleep mode on the printer.
1
Ensure that your printer and the
computer are turned on and connected.
Reference
●
"Connecting an Ethernet Cable" P.32
2
Press the <ENTER> button on the
operator panel.
3
Press the scroll button
to select [Admin Setup], and press the
<ENTER> button.
4
Enter the administrator password, using
the numeric (0-9) keys.
The factory default password is "aaaaaa" Press
the <ENTER> button after each character you
input.
several times
- 41 -
5
Press the <ENTER> button.
6
Check that [Network Setup] is selected
and press the <ENTER> button.
7
Press the scroll button
to select [EtherTalk], and press the
<ENTER> button.
8
Press the scroll button
[Enable], and press the <ENTER>
button.
9
Press the <BACK> button until
[Network Setup] is displayed.
Connecting to a Computer
several times
to select
1