Printing From Unix; Print - Oki B6500 Network Manual

P F UNIX
RINTING ROM
Take note of the following when printing from UNIX:

Print

• In the spool mode, up to 32 files can be printed by one
command. Files that come after the 32nd file will be ignored.
An instruction with more than 32 files will be treated by the
printer as a print request of up to 32 files.
• In the spool mode, if the print data is bigger than the
remaining capacity of the hard disk or the memory at the
point of receiving, the data will not be received by the printer.
NOTE
> Some client workstations may re-send immediately when
the print data has exceeded the receiving capacity. When
this occurs, the client workstation appears as if it has
crashed. To rectify this situation, the client must be
stopped from sending print data.
> In the non-spool mode, multiple files can be printed by
issuing one command. Furthermore, the number of files is
not limited.
> In the non-spool mode, printing will commence once the
data starts to be received by the printer. Therefore, if the
printer has accepted a print request from a client
workstation, it will not receive another print request from
another client workstation.
> Options, such as -m option, not processed by the
workstation which sends the print instructions will not be
valid.
> For PCL and DUMP, the specification for the number of
copies is invalid.
B6500 Network Guide> 48